Description:

Wireless Indoor Motion Sensor Receiver IRDCR-2500

The IRDCR-2500 is a kit that contains one DCIR-2500 motion sensor and one DCR-2500 receiver. It has a wireless range of up to 2500 feet* and it is fully compatible with any of our 2500 Series transmitters or receivers, the DCIR-2500 will allow you to monitor many locations that were difficult before. The passive infrared detector is able to monitor an area up to 100° wide. With the integral mask, the detection area can be narrowed down to 20° or anywhere in between. With the swivel mount, the DCIR-2500 sensor can be adjusted right to left up to 80° and up and down up to 50°. With three different sensitivity settings, the DCIR-2500 can detect a person up to 12 feet, 25 feet, or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent.

The DCIR-2500 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The DCIR-2500 is designed for indoor or light duty outdoor applications under an eave, awning, or other protected location.

Operating Range: -30°F to 120°F

*Actual range will vary depending on the environment.

• Dakota Alert® 2500 series wireless passive infrared motion sensor kit
• When motion is detected, IR sensor transmitter sends signal to receiver to alert you
• Passive infrared (PIR) technology senses movement even during the night
• Transmits up to 1/2 mile away to receiver
• Mount sensor anywhere-- easy DIY home or business security solution
• Provides simple solution for being instantly alerted to activity or potential intruders
• Optional LED flashes when signal is sent, or choose to keep flash off to remain discreet
• Detects motion up to 40 feet away; adjustable detection range to either 12 or 25 ft
• Adjustable motion detection angle to anywhere between 20 and 100 degrees wide
• Adjustable swivel range: Left or right up to 80 degrees, up and down up to 50 degrees
• Works with all other 2500 series add-on transmitters
• Additional transmitters may be added to system to alert you from different areas (not included, see Accessories)
• All 4 zones will be monitored by receiver at once
• 4 tone options: Classical, Westminster Chime, Ding Dong, or Whistle
• Designate unique alert tones to different add-on sensors to distinguish which sensor was triggered
• Optional portable receiver accessory with belt clip available so you can get alerts on the go
• Indoor or non-heavy duty outdoor applications beneath protected covering such as awnings and eaves
• PIR sensor powered by 9V battery (not included)
• Approximately a 12-month battery life under normal conditions
• Low battery alert when sensor needs new battery
• Operating range: -30 to 120 degrees Fahrenheit
• Receiver uses 12V DC plug (included) for standard wall outlet
• Includes: 2500 series wireless motion sensor transmitter
• Includes: 2500 series receiver
• Includes: Receiver adapter plug
• Includes: Mounting hardware
• 1-Year Warranty
• Note: Actual signal transmission range may vary due to environmental factors.

Wireless Sensor Specifications

• Frequency: 434 MHz
• Operating range: -30˚F to 110˚F
• Battery life: 6-12 months

Wireless Receiver Specifications

• Frequency: 433.92 MHz
• Operating voltage: 12VDC
• 12 volt DC output current: 400 mA maximum
• Relay rating: 24VDC at 3 Amp